A cracked, loose, or missing handle makes a sliding door awkward and unsafe to use — and because the handle and lock are usually one assembly, a failing handle often means the lock isn't working right either. Lincoln Sliding Doors provides handle repair and replacement for patio and sliding doors across the Daytona Beach area.
We match new handle sets to your door so the replacement looks right and, more importantly, latches and locks the way it should.
What this service solves
A solid, properly fitted handle makes the door easy and safe to operate and — since it's tied to the latch — restores secure locking. No more pulling on a wobbly handle or working around a broken one.
Warning signs to watch for
- The handle is cracked, loose, or has come off
- The interior or exterior pull is missing
- Operating the handle doesn't reliably work the latch
- The mounting screws won't tighten and hold
- The handle set looks corroded or worn out
Common causes
- Everyday wear loosening and cracking the handle over years
- UV and salt exposure degrading the material
- A failing latch mechanism the handle connects to
- Stripped mounting holes that no longer hold screws
- A previous mismatched or poorly fitted handle
What our technician checks
- The handle set's condition inside and out
- How the handle engages the latch and lock
- The correct replacement handle for your door's spacing
- The mounting points and screw holes
- Whether the lock needs attention at the same time
Our repair process
Assess the handle set
We check both pulls, the latch linkage, and the mounting to see what's failed.
Match the hardware
We identify the correct handle set for your door — the screw spacing and lock type have to match to work properly.
Fit the new handle
We install the matched handle and latch, repairing any stripped mounting points so it holds securely.
Test lock and pull
We confirm the handle operates the latch smoothly and the door locks cleanly before finishing.
Repair or replace?
If only a screw has worked loose or a set screw has backed out, a quick repair puts the handle right. But cracked or corroded handles are a replace item — plastic and pot-metal handles don't come back once they've failed.
Because the handle and lock are typically one unit, replacing a broken handle is a natural time to make sure the lock repair side is solid too, so you finish with a door that both opens easily and locks securely.
The Florida & coastal factor
Sun and salt are hard on exterior handles here. UV embrittles plastic components and salt corrodes metal ones, so coastal handles tend to fail sooner. We fit durable replacements suited to the exposure your door actually sees.
Residential & commercial
Commercial door handles endure constant use and need to be robust. We supply and fit heavier-duty handle and lock sets for storefronts, offices, and rental units.
Frequently asked questions
Can you match my existing handle style?
In most cases, yes. We identify the screw spacing and lock type and fit a matched or closely matching handle set that works correctly with your door.
The handle is loose — can it just be tightened?
Sometimes. If the mounting holes are stripped, we repair them so the screws hold. If the handle itself is cracked, replacement is the durable fix.
Does replacing the handle fix the lock too?
Often, because they're one assembly. If the latch is worn, a new handle-and-lock set restores both operation and security together.
Do you carry handles for older sliding doors?
We source handle sets for a wide range of older and current doors, including many discontinued styles.
How quickly can you replace a broken handle?
Common handle sets are usually a same-visit job. If your door takes an unusual part, we'll source it and schedule promptly.